|
To my customers:
DuraVent has a MAP (Minimum
Advertised Price), that, as a dealer in good standing, I must follow.
The prices I have published are to the penny, as low as I can PUBLISH.
DuraVent is a complicated product line, with many options. Please
call us at 888.321.5647 so we can help you with the parts you need for
your installation. At that time, we can take a look at your
installation and provide you with LOWER
PRICES to meet your needs.
Engineered Excellence
Thermal Tech blanket insulation, encased between dual walls of stainless
steel, offers the optimum in safety and performance.
Thermal Tech Insulation
Thermal blanket insulation keeps the outer wall of the chimney cool,
while ensuring high flue gas temperatures for optimum draft performance.
Encased between dual walls of stainless steel, Thermal blanket insulation is locked into position. This eliminates hot spots
common with loose-fill type insulation. No sifting, setting, or dangerous voids.
In the event of a creosote fire, compressible blanket insulation permits the
chimney liner to expand outward in a radial direction. The free floating
liner design also permits the liner to expand in a longitudinal direction. This
eliminates buckling and loss of structural integrity associated with solid-pack
type installations.
Ease Of Installation
Sleek one-inch wall design
provides for easy installations, such as installation through 16" on center
rafters. Lightweight insulation,
combined with twist-lock fittings, provides for a new ease of installation.
Support boxes feature factory installed
twist-lock fittings. Elbows offer 360° swivel.
Stainless Steel Construction
0.016" 430 stainless steel outer
wall. .020" 430 stainless steel inner-liner (25% thicker than
competitive chimneys for an extra margin of safety.) Twist-lock end rings
provide for ease of assembly. Precision tooled end ring design seals the
insulation chamber to prevent water and creosote from soaking into the
insulation.
Listed by Underwriters Laboratories.
This 2100° Chimney has been
tested and listed to the UL 103 HT standard, UL File #MH7399. Designed for
normal continuous operation at 1000° F flue gas temperatures, 6"
and 8" diameters have been subjected to rigorous and stringent UL testing
including one hour at 1400° F, plus three ten-minute chimney fire tests at 2100°
F.
Warranty
Limited Lifetime Warranty.
Installation Instructions
Factory Literature
Click
"Continue Shopping" in
shopping cart to return to this page to complete your order.
9607CF
8" x 48" Chimney Section
Stainless Steel Outer Shell
Free
Carton Foam Packed (CF)
To Reduce Shipping Damage |
$323.82
$291.43
$272.37
|
9606CF
8" x 36" Chimney Section
Stainless Steel Outer Shell
Free
Carton Foam Packed (CF)
To Reduce Shipping Damage |
$284.52
$256.07
$239.31
|
9605CF
8" x 24" Chimney Section
Stainless Steel Outer Shell
Free
Carton Foam Packed (CF)
To Reduce Shipping Damage |
$179.97
$161.97
$151.38
|
9604
8" x 18" Chimney Section
Stainless Steel Outer Shell |
$141.75
$127.57
|
9602
8" x 6" Chimney Section
Stainless Steel Outer Shell |
$103.57
$93.22
|
9664KIT
8" x 15 Degree Elbow
Stainless Steel Outer Shell
Kit Contains Two Elbows,
One Elbow Strap |
$454.32
$408.88
|
9666KIT
8" x 30 Degree Elbow
Stainless Steel Outer Shell
Kit Contains Two Elbows,
One Elbow Strap |
$560.54
$504.49
|
9675SS
8"
Tee With Cap
Stainless Steel Outer Shell |
$369.48
$332.54
|
9672SS
8"
Tee Support Bracket
Stainless Steel |
$268.85
$241.96
|
9643SS
8"
Wall Thimble Exterior Cover
Stainless Steel
Requires 9643 below |
$122.66
$110.40
|
9643
8"
Wall Thimble
Galvanized |
$94.73
$85.26
|
9655
8"
Finishing Collar |
$42.60
$38.34
|
9649
8"
x 0/12 to 6/12 Flashing |
$96.20
$86.58
|
9649DSA
8"
x 0/12 to 6/12 Flashing
For metal and tile roofs |
$131.42
$118.28
|
9650
8"
x
7/12
to 12/12 Flashing |
$124.87
$112.39
|
9650DSA
8"
x
7/12
to 12/12 Flashing
For metal and tile roofs |
$191.72
$172.55
|
9559
8"
Storm Collar |
$15.41
$13.87
|
9645
8"
Round Ceiling Support
Box |
$72.72
$65.44
|
9545TR
8"
Round Ceiling Support
Box Trim Collar |
$47.72
$42.95
|
9638A
8" x 11" Square Ceiling Support Box |
$160.12
$144.11
|
9638B
8" x 24" Square Ceiling Support Box |
$178.49
$160.64
|
9638D
8" x 36" Square Ceiling Support Box |
$198.33
$178.50
|
9647
8"
Firestop Radiation Shield |
$72.72
$65.44
|
9646
8"
Attic Insulation Shield |
$101.35
$91.22
|
9684
8"
Rain Cap |
$151.31
$136.18
|
Dura
Tech Most Commonly Asked Questions
Q: What is the clearance to
combustibles to DuraTech Pipe?
A: Clearance to combustibles are 2” minimum.
Q: What is DuraTech made out of?
A: The inner wall is 430 stainless
steel.
The outer wall is 430 stainless
steel.
The outer wall can also be galvanized.
Q: How much pipe will the support box hold?
A: The square support and the flat support box will hold up to 60’
of pipe. The round support box will hold up to 40’ of pipe.
Q: Do I have to frame around the
support box?
A: Yes. All 4 sides need to be framed.
Q: Are you required to use a
locking band for the joints of DuraTech pipe?
A: No. Locking bands are optional for DuraTech.
Q: Can I put screws in the joints
of DuraTech pipe?
A:
Yes. Screws are optional.
Q: Do I need to use a wall
thimble when going through a concrete wall?
A: Yes. DuraTech requires a wall thimble whenever passing thru a
wall.
Q: What is the longest piece of
DuraTech pipe I can use through a wall thimble?
A: The maximum length of pipe thru a wall thimble is 2’.
Q: How far into the room does the
DuraTech Pipe need to extend when going through a wall thimble?
A: 6” minimum into the room.
Q: Can I attach DuraTech directly
to a free standing wood stove?
A: No. Use stove pipe from the stove then transition to
DuraTech.
Q: What seals the pipe as it
passes through the wall thimble?
A: RTV, 500 degree F. or higher. Caulk the pipe to the thimble.
Q: How much pipe will a DuraTech
tee support hold?
A:
The DuraTech tee support will hold up to 60’ of pipe.
Q: Does the tee support go below
or above the tee?
A: You can install the
tee support above or below the DuraTech
tee.
Q: Where would I find the
information about framing the thimble or support box?
A: The Framing dimensions are in the DuraTech installation
instructions.
Q: What do I do when coming to an
overhang or eave above?
A: There are 3 options to choose from;
a) Penetrate the overhang.
b) Box out the overhang.
c) Offset the pipe with 30 or 15 degree elbows to go around
overhang or eave.
Q: Can I add more than one elbow
together to make an angle greater than 30°?
A: No. You can only use sets of the same elbows. The maximum Offset
is 30 degrees.
Q: How many offsets can I have?
A: DuraTech can have 2 offsets.
Q: What is the longest offset
allowed with DuraTech pipe?
A:
Not more then 72” 2 sections max.
Q: How many elbow straps do I
need for an offset?
A: If the total length of chimney sections between the (2) elbows
is greater then 3 Feet, install a second elbow strap around the center
of the chimney section.
Q: Can I offset directly on top
of a support box?
A: No. You must use a piece of pipe in the support box. Then you
can start your offset.
Q: What adaptor should I use for
a zero clearance fireplace?
A: The
anchor plate.
Q: Can I offset directly on top
of an anchor plate?
A: Yes.
Q: What is used to secure the
transition anchor plate to the masonry chimney?
A: 1000 degree F. stove cement as a gasket material. Use
mechanical fasteners to secure transition anchor plate to masonry
chimney.
Q: What is the height requirement
for a factory built chimney?
A:
3’ minimum above the roof penetration and 2’ taller then any
thing within 10’.
Q:
At what intervals are
wall straps required?
A: Secure the chimney with wall straps at a minimum of 8’
intervals.
Q: When do you need an extended
roof bracket?
A: When the chimney extends more then 5’ above the
last wall strap or flashing.
Q: Is a Simpson DuraVent
manufactured cap mandatory?
A:
Yes. In order to have an approved UL system you must use the
DuraVent cap.
Q: Can I paint the pipe?
A: Yes. Prep pipe before painting.
Q: Does DuraVent make adjustable lengths?
A: No. DuraTech comes in fixed lengths only.
Chimney Design
Recommendations
The following design recommendations are intended
as only a general guideline to assist in the design
and selection of chimney components for your
installation. Read and follow the before installing your
chimney system.
- The size of the chimney should match the
outlet size of the appliance. Improperly sized
chimney results in poor draft and excessive
creosote formation.
- If possible, avoid the use of elbows, tees,
and offsets that serve to restrict the natural
draft. A straight vertical installation is more
efficient and less likely to develop creosote.
- Install the chimney in the interior of the
structure whenever possible. A cold exterior
chimney will produce less draft, and will
generate more creosote.
- Be fire safe! Maintain the minimum 2-inch
clearance (air space) to combustibles. Use
proper support and bracing. Follow local
building codes and have your chimney inspected.
How To Plan Your Chimney
Installation
Measure the diameter of the appliance flue
outlet. Select chimney and black stove
pipe with the same size flue dimension as the
appliance.
Measure the
roof pitch. For example, a 6/12 pitch has a
vertical rise of 6" over a horizontal
distance of 12". Select the appropriate
flashing. See Drawing 1.
Determine the
minimum chimney height above the roof line.
Building codes require a minimum of three feet
above the roof penetration, and at least two feet
higher than any portion of a building within ten
feet. See Drawing 1.
If an offset is
required to avoid rafters or other obstructions,
measure the horizontal distance required and the
vertical height available. Refer to the offset
tables. Use elbow straps to ensure adequate
support. See Drawing 2.
Determine the
total length of chimney and stove pipe required
for the installation. To calculate the installed
length, subtract 1
1/4" per joint of chimney pipe. Subtract 1
1/4" per joint for black stovepipe. Minimum
chimney height, at sea level for a straight
vertical chimney, is 10 to 15 feet above the
appliance outlet. Higher elevations, or the use of
elbows or a tee will require approximately 30 to
60 % more height to provide for an adequate draft.
Drawing One.
Drawing Two
This product line must be installed
by a trained professional installer.
Send mail to
Sales@FireLogs.com with comments about this web site.
Copyright © 1997
www.FireLogs.com
Last modified:
May 14, 2013
092408
121008
071211
 gas
logs, vent free gas logs, gas fire logs, gas logs fireplace,
gas log, gas fireplace logs, fire pit logs, fireplace gas logs, vent free gas
fireplace logs, outdoor gas logs, gas log sets, fireplace gas log set, gas log
sets, fireplace gas log set, ventless gas fireplace logs, vent free gas log, gas
fireplace log, Hargrove gas logs, gas logs set, gas fire log, Peterson gas logs,
vented gas fireplace logs, vent free gas
log set, vented gas logs, Peterson gas log, fireplace gas log, vented gas
log, outdoor gas log, gas fire pit, outdoor gas fire pit, gas fire pit, vented
gas log set, gas fire rings, gas fire ring, vented gas logs, outdoor fire pit,
gas log fires, gas fire pits, natural gas fire pit, gas log heaters, outdoor gas
firepits, fire pit rings, natural gas fire pit, gas fire pit rings, propane gas
fire pit, fire pit gas, natural gas outdoor fire pit, Peterson vent free gas
logs, non vented gas logs, gas fire pit ring, outdoor fire pit gas, gas outdoor
fire pits, fire pits gas, Peterson vented gas logs, outdoor natural gas fire
pit, fire pit gas ring, HPC firepit, gas log ,gas logs, Peterson Gas Logs,
Peterson Gas Log, Peterson, Real Fyre, Real Fyre Gas Logs, Real Fire, fire
logs, gaslogs, firelogs, fireplace logs, fireplace gas logs, natural gas, l.p.
gas, Robert H. Peterson, Real Fyre, gas logs, Hearth Products, DuraVent, Dura
Vent, DuraVent Chimney, Dura Vent Chimney, Majestic, gas logs, Majestic
Fireplaces, Outdoor Fire, Camp Fire, Campfyre, gas logs, Minuteman, Hy C,
Lyemance, U.S. Fireplace, FAQ, Fireplace FAQ ,Golden Oak, Charred Oak, Charred
Frontier Oak, Split Oak, Royal English Oak, Hearth Glow Oak, Charred Golden
Campfyre, Charred American Oak, Rugged Split Oak, Split Oak Designer, Charred
Majestic Oak, Golden Oak Designer, Old English Coal Grate, Magnificent Inferno,
Twilight Inferno, Canyon Wildfire, Inferno Series, Evening Fyre, vent free,
vent-free, unvented, vent free gas logs, vent-free gas logs, unvented gas logs,
fireplace, wood stove chimney, gas fireplace, gas logs, vent-free fireplace, gas
fireplaces, gas logs, propane, propane gas logs, hearth, gas logs, Firelogs,
Fire Log, Fire Logs, Real Fyre, gaslogs, fireplace logs, gas logs, natural gas,
natural gas logs, propane gas logs, lp gas, Robert H. Peterson, vent free,
vent-free, unvented, AGA, CSA, RADCO, fireplace, gas fireplace, realfyre, G4,
G45, G46, G8, G9, G10, G18, G21, Royal English Oak, split oak, gas direct vent,
gas appliance, chimney cap, fireplace damper, top sealing damper, gas logs.
gas
logs, vent free gas logs, gas fire logs, gas logs fireplace, gas log, gas
fireplace logs, fire pit logs, fireplace gas logs, vent free gas fireplace logs,
outdoor gas logs, gas log sets, fireplace gas log set, gas log sets, fireplace
gas log set, ventless gas fireplace logs, vent free gas log, gas fireplace log,
Hargrove gas logs, gas logs set, gas fire log, Peterson gas logs, vented gas
fireplace logs, vent free gas log set, vented gas logs, Peterson gas log,
fireplace gas log, vented gas log, outdoor gas log, gas fire pit, outdoor gas
fire pit, gas fire pit, vented gas log set, gas fire rings, gas fire ring,
vented gas logs, outdoor fire pit, gas log fires, gas fire pits, natural gas
fire pit, gas log heaters, outdoor gas firepits, fire pit rings, natural gas
fire pit, gas fire pit rings, propane gas fire pit, fire pit gas, natural gas
outdoor fire pit, Peterson vent free gas logs, non vented gas logs, gas fire pit
ring, outdoor fire pit gas, gas outdoor fire pits, fire pits gas, Peterson
vented gas logs, outdoor natural gas fire pit, fire pit gas ring, HPC firepit,
gas log ,gas logs, Peterson Gas Logs, Peterson Gas Log, Peterson, Real Fyre,
Real Fyre Gas Logs, Real Fire, fire logs, gaslogs, firelogs, fireplace logs,
fireplace gas logs, natural gas, l.p. gas, Robert H. Peterson, Real Fyre, gas
logs, Hearth Products, DuraVent, Dura Vent, DuraVent Chimney, Dura Vent Chimney,
Majestic, gas logs, Majestic Fireplaces, Outdoor Fire, Camp Fire, Campfyre, gas
logs, Minuteman, Hy C, Lyemance, U.S. Fireplace, FAQ, Fireplace FAQ ,Golden
Oak, Charred Oak, Charred Frontier Oak, Split Oak, Royal English Oak, Hearth
Glow Oak, Charred Golden Campfyre, Charred American Oak, Rugged Split Oak, Split
Oak Designer, Charred Majestic Oak, Golden Oak Designer, Old English Coal Grate,
Magnificent Inferno, Twilight Inferno, Canyon Wildfire, Inferno Series, Evening
Fyre,
vent free, vent-free, unvented, vent free gas logs, vent-free gas logs, unvented
gas logs, fireplace, wood stove chimney, gas fireplace, gas logs, vent-free
fireplace, gas fireplaces, gas logs, propane, propane gas logs, hearth, gas
logs, Firelogs, Fire Log, Fire Logs, Real Fyre, gaslogs, fireplace logs, gas
logs, natural gas, natural gas logs, propane gas logs, lp gas, Robert H.
Peterson, vent free, vent-free, unvented, AGA, CSA, RADCO, fireplace, gas
fireplace, realfyre, G4, G45, G46, G8, G9, G10, G18, G21, Royal English Oak,
split oak, gas direct vent, gas appliance, chimney cap, fireplace damper, top
sealing damper, gas logs.
|
